System Firmware Update

HDT-P1000

Latest Firmware for HDT-P1000

Version 0x00000bbf to HDT-P1000 was released on August 16, 2020 and now available. Use the link below to install the latest system firmware version 0x00000bbf.

Always update your HDT-P1000 to the latest firmware of the system software. By updating, you can enjoy additional features, improved usability, and enhanced security.

Download Update

Updating Steps

  • Download the latest firmware from the link above and copy the update file into a USB flash drive formatted as FAT32.
    *If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.
    *Note: DO NOT copy the firmware file into a folder in the USB flash drive.
  • Plug the USB flash drive to HDT-P1000 unit.
  • Remove the power cable, and then plug it back in.
  • The updating process automatically starts.
  • When the device turns back on, the update is complete.
    *DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.
United MixMedia Receiver

Latest Firmware for HDT-E1000

Version 0x00000bbf to HDT-E1000 was released on August 16, 2018 and now available. Use the link below to install the latest system firmware version 0x00000bbf.

Always update your HDT-E1000 to the latest firmware of the system software. By updating, you can enjoy additional features, improved usability, and enhanced security.

Download Update

Updating Steps

  • Download the latest firmware from the link above and copy the update file into a USB flash drive formatted as FAT32.
    *If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.
    *Note: DO NOT copy the firmware file into a folder in the USB flash drive.
  • Plug the USB flash drive to HDT-E1000 unit.
  • Press MENU button on the remote control.
  • Select INFORMATION tab.
  • Go to software upgrade.
  • Press OK button on the remote control.
    *Note that the unit restarts itself automatically.
  • When the device turns on, the update is complete.
    *DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.
  • Watch the video to see the Update Tutorial.
United MixMedia Receiver

Latest Firmware for HDT-M1000

V3.27 to HDT-M1000 was released on December 12, 2017. Use this update to install system firmware v3.27.

Always update your HDT-M1000 to the latest version of the system firmware. By updating, you can enjoy additional features, improved usability, and enhanced security.

Download Update

Updating Steps

  • Before you update, your HDT-M1000 version must be lower than V3.27. To check your device version, go to MENU > INFORMATION
  • Download the latest firmware from the link above and copy the update file into a USB flash drive formatted as FAT32.
    *If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.
    *Note: DO NOT copy the firmware file into a folder in the USB flash drive.
  • Plug the USB flash drive to your HDT-M1000 unit.
  • Press MENU button on the remote control.
  • Select INFORMATION tab.
  • Go to software upgrade.
  • Choose HDT-1000_3.27.upd, press OK on the remote control then choose YES and press OK on your remote control.
  • After pressing OK, the device restarts automatically.
    *DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.
  • Watch the video to see the Update Tutorial.