Download the latest firmware from this LINK, and copy the update file into a USB flash drive, formatted as FAT32.

If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.

DO NOT copy the firmware file into a folder in the USB flash drive.

Press MENU Button on the Remote Contro.

Choose the Utility List.

Go on SOFTWARE UPGRADE.

Go on FilePath, Choose the Software's File the one that is on Flash Memory.

Go on Start , then Press the OK Button.

DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.

Download the latest firmware from this LINK, and copy the update file into a USB flash drive, formatted as FAT32.

If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.

DO NOT copy the firmware file into a folder in the USB flash drive.

Plug the USB flash drive to HDT-P1000 unit.

Remove the power cable, and then plug it back in.

The updating process starts automatically.

When the device turns back on, the update is complete.

DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.

Download the latest firmware from this LINK, and copy the update file into a USB flash drive, formatted as FAT32.

If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.

DO NOT copy the firmware file into a folder in the USB flash drive.

Plug the USB flash drive to HDT-E1000 unit.

Turn on the STB and Press and Hold (CH-) Until Showing Below Picture.

When the device turns on, the update is complete.

DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.

Note: before you update, your HDT-M1000 version must be lower than V3.27. To check your device version, go to MENU then INFORMATION.

Download the latest firmware from this LINK, and copy the update file into a USB flash drive, formatted as FAT32.

If you do not know how to format your USB flash drive as FAT32, click on this LINK to see a tutorial to format your USB flash drive to FAT32.

DO NOT copy the firmware file into a folder in the USB flash drive.

Plug the USB flash drive to HDT-M1000 unit.

Press MENU button on the remote control.

Select INFORMATION tab.

Go to SOFTWARE UPGRADE.

Choose HDT-1000_3.27.upd, press OK on the remote control then choose YES and press OK on your remote control.

After pressing OK, the device restarts automatically.

DO NOT unplug the device from the power source while updating, otherwise the device will be damaged.